Pulse electronic fence host

  Pulse electronic fence system is different from the traditional high-voltage power grid. Pulse electronic fence system can identify intentional intrusion and unintentional intrusion. And it can intelligently identify the intrusion location and effectively block it, without causing personal injury. The voltage output of the host of the pulse electronic fence conforms to various indicators of international standards/national standards. The pulse voltage of low frequency, low energy and high voltage (5000V~10000V) has a very short action time and will not cause harm to people. The host of the pulse electronic fence can adjust the output pulse voltage at will, which is suitable for various places with different protection levels. The host of the pulse electronic fence can realize multi-level networking through the control keyboard or control software to ensure that the normal use of other defense areas will not be affected in case of temporary conditions in one area.

Product Functions

1. The first pulse host in the industry to display the working status of the host with a color screen. The screen size is 4.3 inches, which is intuitive and atmospheric, and the advantages of standard control are prominent;

2. LCD adopts screen saver processing. After the host is not operated for 2 minutes, the host turns off the LCD display, which greatly reduces the power consumption of the host, improves the working efficiency of the host, and advocates the national requirements for energy conservation and environmental protection of electronic products; In addition, it can also confuse the lawbreakers, thinking that the host is in the shutdown state and conducting illegal operations; This will achieve better warning effect.

3. The host parameters can be modified through the host control panel, such as the zone number, high-voltage output amplitude, cycle, etc;

4. The power supply adopts a wide voltage input range to adapt to the use environment of countries around the world (AC: 100~260V), which is superior to the power input requirements of traditional electronic fence hosts (AC: 180~220).

5. The high-voltage output gear is adjustable, 0.7KV, 2.5KV, 3.0KV, 3.5KV, 4.0 KV, 4.5KV, 5.0 KV, which is convenient for users to set appropriate pulse high-voltage according to different environments; The remote control terminal can also be used to set the host time division timing voltage output;

6. The pulse period can be adjusted freely, and the fastest time is 1s (required by the national standard);

7. New Zealand stafix technology is adopted for the high voltage output of the host, which can realize that each line on the front end fence has high-voltage pulse electricity, making it impossible for intruders to take advantage of this technology. This technology has the following advantages: 1. The same output voltage is more powerful than traditional BI Polar technology (customer's actual experience), 2. High voltage output efficiency is higher;

8. The LCD screen displays rich contents, such as host operating status, pulse cycle, pulse amplitude, alarm status, output high-voltage waveform, defense zone number, power supply status, system real-time time, etc;

9. The host has a built-in alarm horn. When the host triggers an alarm, the alarm horn will give an alarm sound to remind the staff to handle the alarm, which is superior to the traditional host.

10. The host has switching value and DC12V2A auxiliary power output interface. The traditional fence host is DC12V1A, which can only connect one alarm, while DC12V2A means that it can connect two alarms.

11. The host is equipped with a 12V 4AH battery interface, which can last up to 10 hours. It can also be equipped with higher capacity batteries according to customer needs;

12. The construction routing design is reasonable and the installation is convenient;

13. (Four line, six line) The host can be independently deployed and disarmed, leading the industry;

14. The traditional 485 bus mode is adopted for communication, and multi-level networking can be realized through control keyboard or control software;

15. The appearance design adopts unique patented technology, which is simple, generous and beautiful.

Product parameters:

Product parameters:

Model: TD4M1S, four line single zone pulse electronic fence host

Length of controllable zone: 1~500m.

Protection level:

High grade: ≤ 100m

Medium grade: ＜ 300m ＞ 100m

Low level: ≥ 300m

Parameter description:

1. Number of defense zones: 1

2. LCD screen displays the working condition of the host

3. Environmental power supply:

AC180V-240v 50Hz variable voltage power supply: DC18~24V

4. Environmental parameters:

Temperature: - 30 ℃~50 ℃

Humidity: ≤ 95%

5. Pulse parameters:

Output high voltage peak value: 4.5KV~10KV

Output low-voltage peak value: 700~1000V

Peak value of pulse current:<10A

Pulse duration: ≤ 0.1s

Pulse interval time: 1s

Maximum power output of single pulse: 2.5mC

Maximum output energy of single pulse: ≤ 5.0J

System power consumption:<5W

6. Size: 300 * 220 * 124mm

7. Weight: about 3.5KG

8. Alarm triggering mode: disconnection, short circuit, anti disassembly and disconnection

9. Communication interface: RS485